|
Sound Check 2 Test CD with Frequency Response Analyser
 Professional Audio Test Disc and Frequency Response Analyser all built into a double CD case - includes the microphone, just add four AAA batteries. A truly affordable way to set up your car audio sound system.
£82.95 inc VAT and p&p
(UK only)
in stock
We think this is seriously cool. An audio test disc compiled by one of the world’s leading sound engineers (Alan Parsons) with a sound level analyser actually built into the CD case! Terrific for checking the frequency response of your sound system when setting up and tweaking your system’s EQ settings and crossover points. And by using the adjustment on your seat’s headrest to clamp the case in place, you don’t even need a microphone stand! We show you how and tell you a whole lot MORE HERE
KOB Audio SLI (Sound Level Indicator)
 The SLI is an easy-to-use, key-chain mounted sound level indicator that helps identify when music, SPL test tones or general noise is at a potentially dangerous level. Three indicator LEDs show if it is safe to your hearing, up to highly dangerous (over 105dbA).
£19.95 inc VAT and p&p (UK only)
in stock
While the device is primarily intended as a simple hearing safety check, it can also be used as a fun way to check SPL (sound pressure levels) of vehicle audio systems at informal gatherings, sound-offs, track events etc. by checking level from a short distance away, to help overcome the SLI’s relatively limited 105dB max readout.
The SLI is accurate to within 3dB but is not calibrated or able to be calibrated, and cannot show an accurate readout beyond the 105dB indicator, therefore it is not intended or recommended for formal competition use.
Tests are done on a simple ‘point and shoot’ basis. The LEDs show the approximate level as follows (all dB measurements are A-weighted):
Green - flickering: 55dB
Green - on continuously: 60dB
Yellow - flickering: 75dB
Yellow - on continuously: 80dB
Red - pulsing slowly: 100dB
Red - pulsing rapidly: 100-105dB (dangerous level)
Red - on continuously: Greater than 105dB (very dangerous)
No LEDs alight (or an even flickering): Level too low to register (or battery is flat)
At 80dB(A), an employer must advise of potential hearing danger. 85dB(A) is the level where the employer must provide hearing protection and enforce its use.
Includes, pre-fitted in the SLI, two button cell batteries. These should last approximately 1000 measurements, assuming 10 second test duration.
Moldex Ear Plugs Pocket-Pak from KOB Audio
 Keep Safe, Keep Hearing!
These Moldex earplugs are reusable, personal issue items made from a very soft silicon-type material for maximum long-term comfort and to ensure an easy and effective fit into the ear canal. They conform to EN352-2. (SNR value 30 dB)
They are brightly coloured, making it easy for show or contest organisers to check for compliance amongst competitors and judges. Washable and designed with a convenient insertion/extraction handle. Supplied in a pocket hard-shell carry pack for hygienic storage when not in use.
Pair of Moldex Earplugs in carry container:
£5.99 inc VAT and p&p
(UK only)
in stock
TEC CAR AUDIO SPL-X In-Car Sound Pressure Level  Meter with Real-Time SPL Display, Peak Hold and Battery Voltage Indication
Designed and built in Italy, this has to be the most user-friendly device for measuring high SPL in a car. The panel is a standard DIN size, allowing it to be mounted in the dash or in the optional instrument case. The case includes a built-in mains supply and battery pack, making it ideal of use by installers or for competition use.
MORE INFORMATION >
Ordered on request.
Contact us for pricing details.
|
